Garage Door Double Spring Change in Vancouver

 In blog

Garage Door Double Spring Change in Vancouver

Single Spring that has visible damage. You can see that the spring has a gap showing he torsion bar. This means that your door will not lift as normal. If you try to open this door with the motor you will find that the door will not lift all the way. The motor will not be able to lift the extra weight that the springs were lifting.

spring change vancouver

View of spring that has damage (broken). This spring has been over used and has shown it’s age with the fact that there is a gap where there shouldn’t be. This indicates that there is a broken spring. You need both springs on your door to be in a working state for your door to lift normally. If you find that you have a broken spring, please call us at: 604-940-8918

Top fixture with adjustments that need to be reversed. It turns out that the homeowner wanted to repair the door himself and in turn caused a few problems that he didn’t know how to get out of. Our technician was able to get the door back to working condition.

center bearing plate loose

Top fixture that is requiring fastening. This is a serious issue. If you see that there is loose part on your garage door then you will need to have them tightened. The center bearing plate is a serious component of the garage door that should never be loose. Make sure that if you see any loose parts that you call us at: 604-940-8918

Tightened center bearing plate. This is in the proper position. The assembly should not have any loose parts.

Recommended Posts

Start typing and press Enter to search