Garage Door Assembly for a Renovation in Kitsilano Vancouver
![After the springs tension has been removed so hardware assembly can be safety dismantled.](https://accessgaragedoors.ca/wp-content/uploads/2019/04/20190329_095020-e1554137578348-576x1024-1.jpg)
Before end drum is removed so new hardware / door can be installed.
![](https://accessgaragedoors.ca/wp-content/uploads/2019/04/20190329_102520-1024x576-1.jpg)
After garage door assembly has been taken down.
![](https://accessgaragedoors.ca/wp-content/uploads/2019/04/20190329_102550-1024x576-1.jpg)
After complete assembly (tracks, springs, torsion bar, drums, motor) has been dismantled. The garage door is secured against the wall
![Garage door assembly that is in the midst of being removed for a renovation.](https://accessgaragedoors.ca/wp-content/uploads/2019/04/20190329_095029-1024x576-1.jpg)
View of spring assembly mounted in a front torsion setup. You can see the insulation is hanging down due to the renovation that is taking place.
![This garage door motor will be removed for the renovation](https://accessgaragedoors.ca/wp-content/uploads/2019/04/20190329_095036-1024x576-1.jpg)
view of trolly rail that has insulation hanging around it’s assembly.
![View of track that is going to be dismantled so renovation can continue.](https://accessgaragedoors.ca/wp-content/uploads/2019/04/20190329_095044-1024x576-1.jpg)
View of track that is going to be dismantled so renovation can continue.
![](https://accessgaragedoors.ca/wp-content/uploads/2019/04/20190329_102525-1024x576-1.jpg)
After track has been removed and fastener removed from mounting surfaces.
![](https://accessgaragedoors.ca/wp-content/uploads/2019/04/20190329_102536-1024x576-1.jpg)